Rigid uPVC Pipes

Rigid uPVC Pipes


Rigid uPVC Pipes are made of highest grade quality resin which ensures the fulfillment of the basic need for clean and hygienic water. They are made on the latest, state-of-the-art plants in India.

It comes in 3 variants - Plain Pipes, Socketed Pipes & Elastomeric Ring fit pipes. These pipes are manufactured as per IS 4985 : 2000.

Our pipes have a life span of over 50 years if laid & buried below the ground as per prescribed standards.

Plain Pipe:

Plain end pipes are supplied with one coupler for Solvent Cement Joining as per lay & joining standards.

Socketed Pipes:

Self socketed pipes have one end self socketed and other end plain. It joins with the help of Solvent Cement.

Ringfit Pipes:

Brief Description:

Ringfit Pipes comes with Electrometric Sealing ring which enhances the uPVC system joining specially in higher diameter pipes from 140mm - 400mm OD. Rubber sealing rings ensures the leak proof joints and easy installation. Can withstand the pressure beyond the specified testing pressure for pipes.

Range


Rigid uPVC pipes are available in size of 20 to 400 mm and pressure rating of Class 1 to Class 6 (0.25Mpa2, 2.5 Kgf/cm2 to 1.25Mpa2, 12.5 Kgf/cm2) confirming to IS 4985 : 2000 as per application requirement.

Application


Rigid uPVC Plain / Socketed / Ringfit pipes are used for various applications, some of its agricultural and allied applications are:
Irrigation Scheme
Tube Well
Bio Gas Plant
Rainwater
Drinking water supply lines
Main line for sprinklers / drip irrigation
Underground or open pipeline
Telecommunication cable ducting

Features


Corrosion Resistant : Immune to galvanic or electrolytic erosion

Chemical and Biological Resistant : Resistant to acids, oxidizing agents, alkalis, oils and domestic effluents. Fit for high purity water applications

Easy Installation : Pipes of diameter less than 140 mm can be joined by hand pressure while for those of a larger diameter, a pipe jack is adequate

Lower cost of Installation : Lightweight therefore they are easy to transport and carry to the site

Flexibility :Can accommodate slight shifting of the soil, bending of the pipe up to 2 degrees per joint and tolerates small gradients in underground piping

Immediate Testing : Pipes can be tested for ability to withstand pressure immediately on completion of installation. There is no need to wait for the joints to dry, etc.

Maintenance Free : No painting or coating required

Seal Rings: The rings are in accordance with IS : 5382.

It has been designed in such a way that the pipes can be installed with extreme ease & convenience & it does not require any Solvent Cement or Sealants for joining. It absorbs linear expansion, leaving the seal intact, even under extreme temperature variations. The Ring is not affected by ultraviolet radiations, bacteria, fungus or termites. Also, it is resistant to salt water, organic vegetable oils, dilute acids, dilute alkalis, aqueous chlorine and other pollutants found in typical sewage and waste water

Moulded Fittings


Ravi Industries is the producer of the largest range of injection Moulded PVC fittings in the country.It has benchmarked quality in Agricultural Fittings in the Indian market. Today, we are experts in offering fittings that are developed in conformation with relevant national and international standards and made from the highest quality resin. Ravi Industries has successfully established a bond of trust with the Farmers of India so much so that its PVC fittings are used extensively for Agricultural purposes. Light in weight, easy to handle and convenient in transportation they are truly User friendly and hence installing a piping system is very easy.

Range

End Cap Plain / Threaded

Available in sizes from 20mm to 250mm, End Caps are used to successfully close the end of a pipeline.

Female Threaded Adapter (FTA)

Connecting a PVC pipeline directly to a metal pipe is the function of FTA. Available in sizes from 20mm to 250mm. Reducing female threaded adapter (RFTA) is also available. It connects a PVC pipeline directly to a metal pipe of a lower diameter and vice-versa.

Male Threaded Adaptor (MTA)

All types of Valves, G.I. Pipe lines, Metal lines and Pumps can be connected through a male portion of PVC Threaded adaptor. Available in sizes from 20mm to 250mm. Reducing MTA is also available.

Reducer

Reducers are used to convert the service line into a smaller line. They can be single, double or multi stage depending upon the size of the service line and size of the small line.

Service Saddle

Outlets of 20mm (1/2"), 25mm (3/4"), 32mm (1") either Plain or Threaded offered with Nuts, Bolts and Gasket, are used for tapping the large service main line into small feeder line for household purposes. They are available in sizes from 20mm to 250mm.

Tail Piece

Air-release valves/Non-return Valves, Pumps etc. can be easily connected through quality Tail Piece fittings. Available in sizes from 20mm to 250mm.

Female Threaded Tee (FTT)

The FTT functions like the Tee only difference being, one or more ends of this Tee are threaded. Available in sizes from 20mm to 250mm. We also have Reducing Female Threaded Tee (RFTT) in our range.

Couplers

Available in sizes from 20mm to 250mm, couplers are used for joining two PVC pipes.

Elbow 90 degrees

Available in 20mm to 250mm size range, they are used to give a short turn of 90 degrees to a pipeline.

Equal Tee

By-passing and taking service line out of the main line is the main function of the Tee. Available sizes range from 20 mm to 250mm. Reducing tee is also available.